_R_J_K_
Well-Known Member
- Joined
- Dec 20, 2008
- Messages
- 6,723
- Reaction score
- 1,856
- Points
- 113
- Members Ride
- Zenki S14
Hey there,
Just saw the other power window question, so I thought it was time to ask. A few months ago, I tried to put my drivers side (power) window up. Anyway, it was really struggling, then all of a sudden there was this loud snap, and the window then fell through the door. When I took the regulator out, one of the regulator arms was bent at pretty much a 90 degree angle.
None of the little white things were broken, none of the regulator teeth were broken. So anyway, I bent the arm back, and put it back in the door. Whilst doing so, I took a nice chunk of my tinting out with the regulator teeth, as they were rubbing up against the window at one stage.
I have a feeling that it is still rubbing up against the window, just, but I have no way to tell. The window also isn't travelling in the bailey channel correctly (it cuts across the rubber and out of the channel).
My question is, is the regulator arm supposed to have some kind of bend in it from factory?
Thanks heaps.
Just saw the other power window question, so I thought it was time to ask. A few months ago, I tried to put my drivers side (power) window up. Anyway, it was really struggling, then all of a sudden there was this loud snap, and the window then fell through the door. When I took the regulator out, one of the regulator arms was bent at pretty much a 90 degree angle.
None of the little white things were broken, none of the regulator teeth were broken. So anyway, I bent the arm back, and put it back in the door. Whilst doing so, I took a nice chunk of my tinting out with the regulator teeth, as they were rubbing up against the window at one stage.
I have a feeling that it is still rubbing up against the window, just, but I have no way to tell. The window also isn't travelling in the bailey channel correctly (it cuts across the rubber and out of the channel).
My question is, is the regulator arm supposed to have some kind of bend in it from factory?
Thanks heaps.