Shelfish
New Member
Hey guys, i drive a 97 VS II ute V6 model and i've had a problem with my cruise control. I've hooked it up myself with a genuine patch loom i pulled out of a wreck and installed myself, all the voltages on the back seem to be correct and it looks like everything should work in theory but you know how that turns out... something always has to go wrong. i've tried replacing the module itself with not luck but while replacing it i noticed that the old CC module was an RJ type and my new one is an RP, does anyone know what this means or what the difference is? i also heard that cruise control doesnt work well with speed alert boxes, which my car also has. if anyone could shed some light i'd greatly appreciate it!
here's some stats about what i'm reading at the end of the wires:
Pink wire(from fuse 11): 12V output
Black wire(earth): perfect earth(beep tested it)
Green wire(pulse from instruments): 6V while stopped about 3.4V while driving above 55km/hr with the speed alert attatched(unsure of what happens without the speed alert but it is different)
Grey/Green wire(cruise on): relay works perfectly through BCM and 12V while on
Grey/Black(cruise reset): 12V while button is held and turns off when button is released
Blue(cruise engage):12V while button is held and turns off when button is released
white(cruise engage light): no voltage but attatches to the instrument cluster
Brown(brake switches): 12V till clutch or brake is depressed then 0V
Help really would be appreciated, thanks.
here's some stats about what i'm reading at the end of the wires:
Pink wire(from fuse 11): 12V output
Black wire(earth): perfect earth(beep tested it)
Green wire(pulse from instruments): 6V while stopped about 3.4V while driving above 55km/hr with the speed alert attatched(unsure of what happens without the speed alert but it is different)
Grey/Green wire(cruise on): relay works perfectly through BCM and 12V while on
Grey/Black(cruise reset): 12V while button is held and turns off when button is released
Blue(cruise engage):12V while button is held and turns off when button is released
white(cruise engage light): no voltage but attatches to the instrument cluster
Brown(brake switches): 12V till clutch or brake is depressed then 0V
Help really would be appreciated, thanks.