well it moves drove up my drive way on its own effort:dance: bleed the clutch too get it working but i get the mecahnic too bleed it tommorow too as its still a bit empty at the top of the pedal also bleed the coolant again too be sure best safe then sorry also put the bonnet on but that was once i brought it back down from the top of the drive tommorow morning it will be easyer now for the towie, no need to park across the road too winch the car up i can drive it onto the flat. so he will be happy
my antenna hey mate i just bought a vl berlina and the antenna electric aresnot lifting the antenna i was wondering if there was a way of disabling it so that everytime i switch me car off i dont hear the sound of a retracting antenna do you know how to solve this problem ???
well had a hicup with exhaust, the supplier sold the exhuast from under the guy so he wasnt too happy, there shipping one over from perth this weekend so tuesday he reckon all should be swell while i was hanging around at the work shop i played with the idle and got it sitting better, turned the idle up on the computer and adjusted the idle on the manifold much better and wont splutter and try stall when driving now coolant is down a little in the radiator but i just got to keep a eye on it too make sure its all bleed fine, will bleed it a few times more and make sure there is no probs tommorow will be painting all my last parts then while there baking in the booth polish everything else, ill be stone guarding under the car while its being polished and just tidy everything up and make sure all is good. once bar is cooled down ill be able too fit it too
just got home, all the right hand side is polished just the roof and bonnet too go now while Jon was polsihing i basically finished the interor ran the antena cables too head unit area fitted the computer in place, put both kick panels on put both lower dash cover panels on fitted the fan blower control panel changed the door seal trims with better ones off the wagon fitted the air vents properly mounted the fire extinguser on the passenger side of trans tunnel put globes in all three interor light and got them working tested the blower fan and got it all working (vents were dusty as, ha) put drivers seat belt in also changed the dissy cap and rotary arm with new ones tommorow plans are Jon will paint his vs front and rear bars then while he paints my parts i will fit his vs up and he can finsih polishing then ill fit my bar on and other stuff also have a list of other thing that will be doing too rear wheel arches texture coat and the spare wheel well drivers door handle 2 door rubber seals chuck splash shields in etc - just fiddly little stuff got a few pictures on my phone but too late too upload and im too tired
thanks shane well daylight savings has stuffed us up, didnt more clocks forward and got all confussed ha so will head down soon few pics from last night phone quality though
cheers :thumbsup: thanks, nah wont be going anywhere any time soon or in a while called Jon today and he was down polishing the car today, said he will have it finished by tonight but im not sure whats happened really hopeing the exhaust is done tommorow as it will give me more time too work things out payed for a part i won on ebay last night dark blue manual console surround with rubber boot :dance: finally have the console all one colour and done soon
more then there worth $96 plus $5.60 for postage be looking for ages for a dark blue one which is complete tags are all good too so thought why not..... well here is the lay down of the plan today ( wed) exhaust will arrive today, if arrives inn morning it will be fitted if not thursday morning fitted tonight jon will paint bars moulds and fuel flap thursday get up early (5ish) head down too shop and put bar on and fuel flap rear quater end moulds tow it home friday night finish everything i need too, as my weekend ill be busy with 2 birthdya partys monday morning tow down too hi tech, get it running perfect and make sure all is safe rego it at some stage over weekend and drive home from hi tech drive too work over the week and book it in for a wheel alighnement, panhard setting up and camber through work
thanks :thumbsup: exhaust arrived today, said he will be fitting it tommorow morning straight off tryed orgernising a truck tommorow too bring home but they could only pick it up when they could fit me in could be at 8 or 5 no idea when soo have to find a truck whihc will be able too in the after noon would of driven it home but there is no tail lights, cant find the loom so friday my dad will be getting me one, jon didnt want to paint the stuff tonight and said he will friday night, which is ****ed as its really throwing my thoughs out got a 2 partys too go on saturday, one in morning and the night so friday i habve too finish all before i take it too hitech monday morning so thinking no sleep friday
car will be regoed today, details change too ie: car is blue and turbo few calls today for a tail light loom, mum will pick it up for me fit front bar tonight as jon paints it this morning stick rego up and drive it home well tahts the plan, see how this day unfolds
well im home and better yet the car is home, we made it :dance: regoed again and as turbo now just need to fill out a form about the colour change exhaust is done bar is finished, but the end fryed up on bit so it will have to be paint again moulds and fuel flap painted too but end moulds were forgoten cooler is hidden quite well and flutter is loud exhaust is nice and not too loud, has muffler but no rear resi and is manta brand as redback dont do 3" cat back for vls got a list of final things to do and ill get it done tommorow night, monday i can drive it down to hi tech now runs better now not stalling when reved, prob because lack of back pressure before temp was sat under 1/4 on way home but my rack is leaking bad, so ill need too swap it soon pics
