Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

RB30 injector problem

vl_comm

New Member
Joined
Apr 13, 2009
Messages
14
Reaction score
0
Points
0
Location
New Gisborne,Vic
Members Ride
VL commodore 5sp man/EB falcon 5sp man
gday, my rb30 injectors are getting power but aren't firing and the EFI relay is all good, thers fuel runing through the rail aswell if any one noes whats goen on pleas help. cheers

also any 1 wanting to buy a vl rear seat in gook nick pleas ask. cheers

And any ideas on what i should do with my diff.. i was thingking of welding it so whats the best way to do it?cheers
 
Last edited:

detox_nath83

Another VL Driver
Joined
Aug 6, 2005
Messages
2,160
Reaction score
6
Points
0
Age
40
Location
Queensland(Sunny Coast)
Members Ride
VL Turbo Commo
check the Relay near battery one which is connected up to a diode in the loom (3 relays located here, its the one closest to the overflow reservoir) i have had and still have problems with this relay for quite some time now. Probably just an earth problem.
check for corrosion on terminals/spade connectors and under the plug not just the relay.
this relay controls the injectors
 

vl_comm

New Member
Joined
Apr 13, 2009
Messages
14
Reaction score
0
Points
0
Location
New Gisborne,Vic
Members Ride
VL commodore 5sp man/EB falcon 5sp man
hey cheers, thers only 1 relay ther?
but i fount a loose wire and re wired it. this wore ran from the relay to the positive terminal on the battery..now she idles on fuel but if ya try rev it it just dies?
 

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
hey cheers, thers only 1 relay ther?
but i fount a loose wire and re wired it. this wore ran from the relay to the positive terminal on the battery..now she idles on fuel but if ya try rev it it just dies?

try this trick...cover ur afm with ur hand for a second while u rev it, might bring it back to normal :whistling
 

vl_comm

New Member
Joined
Apr 13, 2009
Messages
14
Reaction score
0
Points
0
Location
New Gisborne,Vic
Members Ride
VL commodore 5sp man/EB falcon 5sp man
i would give that a crak but now it just idles really ruff for 3-4secs then dies? and still dies straight away wen ya open the throtle?
 

detox_nath83

Another VL Driver
Joined
Aug 6, 2005
Messages
2,160
Reaction score
6
Points
0
Age
40
Location
Queensland(Sunny Coast)
Members Ride
VL Turbo Commo
exactly what u r stating is caused by CAS or AFM malfunctioning
pull the codes from the ECU


Code 11 - Crank Angle Sensor circuit
Code 12 - Air flow Meter circuit
Code 13 - Coolant Temp Sensor circuit
Code 14 - Vehicle Speed Sensor circuit
Code 21 - Ignition Signal circuit
Code 23 - Trottle Switch circuit
Code 24 - Neutral Start Switch circuit
Code 31 - System Pass (OK) (Non A/C), A/C circuit (A/C models)
Code 32 - Starter Signal circuit
Code 34 - Knock Sensor cicuit (Turbo)
Code 44 - System Pass (OK) (A/C models)
 

vl_comm

New Member
Joined
Apr 13, 2009
Messages
14
Reaction score
0
Points
0
Location
New Gisborne,Vic
Members Ride
VL commodore 5sp man/EB falcon 5sp man
whers the ecu? and "pull them"? are they like fuses or relays i pull out?
(im new to VLs)
 
Last edited:

detox_nath83

Another VL Driver
Joined
Aug 6, 2005
Messages
2,160
Reaction score
6
Points
0
Age
40
Location
Queensland(Sunny Coast)
Members Ride
VL Turbo Commo
ok
Behind your passenger side kickpanel is the ECU (Engine Control Unit)
there is a screw on the side Diognosic Mode Turn this fully clockwise carefully and turn your ignition on
in the peep hole there is 2 LED's Red and Green
RED = Tens
Green = Units
So if red flashes 2 times then green 3 times that means code 23 Representing Throttle Switch
press the throttle to cancel this code
Other codes to cancel is 14 Speed sensor(u can leave it) car needs to go over 10kms to cancel code
24 Neutral Switch.. Move the gear shifter to Drive then to Neutral and then park to cancel code

Then keep an eye on further fault codes coming up
Write down the numbers for us to help u with
codes are seperated with a slight pause
Goodluck buddy
 

vl_comm

New Member
Joined
Apr 13, 2009
Messages
14
Reaction score
0
Points
0
Location
New Gisborne,Vic
Members Ride
VL commodore 5sp man/EB falcon 5sp man
ahh ok
my comms manual?
and how do ya choose which code to see?

or..it only flashes the codes that are playing up?
cheers
 

detox_nath83

Another VL Driver
Joined
Aug 6, 2005
Messages
2,160
Reaction score
6
Points
0
Age
40
Location
Queensland(Sunny Coast)
Members Ride
VL Turbo Commo
it will keep showing these codes in a loop u dont choose the code the code represents the problem the car has and then u can rectify
Dont worry about the 24 code then tell me the codes u get
 
Top