Rb30 issues

[NtHL94]

Make sure the MAF has a good tight seal.

Are the leads in the correct order? Don't assume they were right in the first place, check the order and make sure.

And you didn't say whether you replaced the fuel filter.

Hi there, thanks for the reply! , ill definitely sus this out, and yest replaced fuel filter aswell as the regulator to one with a gauge.

 

[gungazza]

yet timing belt maybe stuffed barn find belt streched due to old age

 

[NtHL94]

Allright so ive finally checked the timing, looking great now, was a couple teeth out, still same issue, fuel rail is pressurised, and noid lights are flashing a signal, but injectors still not spraying, will run once sprayed with a fuel through intake, but dies when you stop. Have also tryed another known working ecu, no luck. Have tryed testing injectors, ohms read perfect and even when i put direct power to injector thats the only time it'll spray fuel. Thanks again guys.

 

[Not_An_Abba_Fan]

There is an injector relay near the battery, check that.

 

[NtHL94]

There is an injector relay near the battery, check that.

Thanks mate! Will do

 

[Joelfrench93]

Thanks mate! Will do

Have you had any luck mate? I'm in the exact same boat, no power to injectors

 

[NtHL94]

Have you had any luck mate? I'm in the exact same boat, no power to injectors

Hey mate! Nothing yet, having an auto elec have a look on thursday, ill be sure to keep you updated fingers crossed. Hopefully nothing major...

 

[Joelfrench93]

Haha please do mate!
I think I'm in the exact same boat, have done the same repairs. Definitely sounds like a job for an auto sparky
Hopefully just the reverse polarity relay or a fusible link

 

[NtHL94]

Hehe i totally agree hehe, thats exactly what im hoping, just the reverse polarity... a few things are adding up that way hehe... fingers crossed lol...

 

[NtHL94]

Haha please do mate!
I think I'm in the exact same boat, have done the same repairs. Definitely sounds like a job for an auto sparky
Hopefully just the reverse polarity relay or a fusible link

Hey sorry it took so long for reply, i had the auto elec come out, he did some testing and basically what he's saying is its the brand new injectors i put in, says maybe there just a bad batch, ive spoken with supplier, and they're willing to do a claim on them, the ohms came back perfect, and there getting pulse but the mechanisms inside aren't working idk hahaha...