Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Rear 1/4 Glass Install - Help

Verillius

New Member
Joined
Apr 4, 2006
Messages
25
Reaction score
0
Points
0
Location
Bundy QLD
Members Ride
VP Vacationer Wagon
Some little SOB decided it was a wonderful idea to kick in my drivers side rear door 1/4 glass. I have picked up a replacement 1/4 glass from an identical model from the wreckers, but I am running into dramas installing the new glass.

I have removed the seals and what was left on the glass in the window, and the new 1/4 glass comes with seals and the like but my dramas are coming with fitting the new glass into the existing slot around the rubber seals on the window.

Anyone done this before, or know how to do?
 

DrJeckyl

New Member
Joined
Jan 10, 2009
Messages
73
Reaction score
1
Points
0
Members Ride
VN commodore S1 & VXII Berlina LS1
You need to remove the whole 1/4 glass rubber and all as far as I know.

You will need to carefully remove the interior plastic covering from inside the car to gain access to the mounting screws.
 

savage1987

Donating Member
Joined
May 8, 2005
Messages
3,660
Reaction score
31
Points
48
Location
Townsville
Website
www.facebook.com
Members Ride
LS1 VN + WK Grange 0010 + HPW VX SS
EDIT: ignore the following, it's for a sedan. Oops.


For a VN, from memory (VP will differ slightly):
Remove hockey stick trim piece below the quarter window (hit towards front of car)
Remove other trim piece above the quarter window. (unscrews(?) )
Remove interior triangular plastic trim piece (will probably crumble into 1million pieces)
Undo nuts on old quarter glass
Remove old assembly
Apply sicaflex to new window to seal properly and not leak water into your boot
Install is reverse of removal.

Search 'VN VS boot leak' for a thread with possibly more info

Hope that helps you! <---- edit: it really won't have.
Sam
 

Verillius

New Member
Joined
Apr 4, 2006
Messages
25
Reaction score
0
Points
0
Location
Bundy QLD
Members Ride
VP Vacationer Wagon
you were pretty much right, had to remove the hockey stick from the rear door to get the little *** in, did that and she went in like a glove, so to speak.
 

ebzery

New Member
Joined
Jan 3, 2011
Messages
1
Reaction score
0
Points
0
Location
tenterfield
Members Ride
vr executive
ok i just had to do this sorry no photos
ist remove door skin the lock is the hardest if you havent done it before the red bit pulls forward and releases lock.
wind window down remove seals around window there are two to do.
the metal guide has a screw and a nut inside the door remove them.
that should let you side the guide across
the glass should slide in easy now
i hope this helps anyone needing to do this.
stone from the mower fixed mine :-(
 
Top