Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Rear brakes

calais24/7

Mucca Mad Boys
Joined
Jul 16, 2009
Messages
1,497
Reaction score
5
Points
0
Location
Canberra
Members Ride
VS Calais II 5L, 98 rodeo v6
Hey
i did a quick search and couldnt find anything on this..
i was wondering how hard it would be to put disc brakes on the back of my SL which didnt come with them. will the vl turbo ( at least i think the turbo's had them?) dics fit straight on without much modification. anyone done this before
cheers for any help/advice
 

VL Berlina 5speed

Apprentice Panel Pusher
Joined
Oct 3, 2005
Messages
2,684
Reaction score
30
Points
0
Age
35
Location
Adelaide
Members Ride
Project VL Show car, VS Exec, VY Ute, YZ250F
can use vn rear disc as its easyer to source
same size and calipers so no diff

but its down too cost
its cheaper and easyer too just get a whole disc rear end froma wreakers ($200)

but if your wanting to swap you need
calipers
disc
caliper lines
disc backing plates
vl disc brake hand brake cable (drum is too long)
and new axle seals pressed onto your axels, the disc seals are bigger then the drum so it will leak
 

VL Berlina 5speed

Apprentice Panel Pusher
Joined
Oct 3, 2005
Messages
2,684
Reaction score
30
Points
0
Age
35
Location
Adelaide
Members Ride
Project VL Show car, VS Exec, VY Ute, YZ250F
is the same brakes
disc calipers are identical (betweem vl - vn)

easyer too go toa wreakers get the whole rear end and swap it then swapping it all and pressing new seals on
 

Not_An_Abba_Fan

Exhaust Guru
Joined
Aug 18, 2006
Messages
14,639
Reaction score
1,364
Points
113
Location
Bunbury, WA
Members Ride
Strange Rover
VB-VS live rear axle no ABS are all the same. With the rear wheel bearings, there is a little spacer ring on the disc brake rear end, that is the difference, without that, they won't fit.
 

damankerrison09

Blue 87 VL
Joined
Feb 25, 2009
Messages
109
Reaction score
0
Points
0
Members Ride
5 Speed VL SL
You cant put Vn disc to disc on your VL, cos the VN is a wider car.. you will have to get it modified to fit under your guards without sticking out.. Just get disc to disc rear end from a from a wreckers and wack it in there... My old vl had discs all round, but it had slightly bigger ones on the back, pulled up sooo fast! Never locked ion me either...
Vl brakes will do you fine :)
 

Not_An_Abba_Fan

Exhaust Guru
Joined
Aug 18, 2006
Messages
14,639
Reaction score
1,364
Points
113
Location
Bunbury, WA
Members Ride
Strange Rover
You can put the disc brake set up on, just not the whole diff. They are the same from VB-VS live axle non ABS.
 

damankerrison09

Blue 87 VL
Joined
Feb 25, 2009
Messages
109
Reaction score
0
Points
0
Members Ride
5 Speed VL SL
Yeh thats what i said, Can't put the whole DISC to DISC! So much easyer to just do the whole VL disc to disc setup.. Just buy a bigger master cylinder to bring the pressure up a bit.
 

Ishtata

pickelz
Joined
Jul 27, 2009
Messages
22
Reaction score
0
Points
0
Location
bundy qld
Members Ride
vl executive auto
just a quick question im having trouble gettin the drums of to check the pads so i can get the girl ready for roadworthy is there any special way to get them off ???
 

VL Berlina 5speed

Apprentice Panel Pusher
Joined
Oct 3, 2005
Messages
2,684
Reaction score
30
Points
0
Age
35
Location
Adelaide
Members Ride
Project VL Show car, VS Exec, VY Ute, YZ250F
release the handbrake :p
ive spent ages once trying to get them off but no luck till i relised

if dosent pop off, get a screw driver (flat) and hammer and slowly work your way around tapping it into the edge so it seprates
 
Top