Rear on vs ute different heights??

[AGRO_38]

i put in ultra lows on my vs ute 2day, but now notice the right side is low. i did read in the manual that the right side spring is 10mm longer and the spacer is longer too. so now that the kings the spring are the same length the right is lower. how can i fix this? anyone else with a vr/vs ute?

 

[1991_Vn2nV]

Do you have an adjustable rear panhard bar? Often this fixes the problem, alot of VN-VS commodores have one side of the rear lower than the other as well

 

[AGRO_38]

yeah i do have an adj panhard rod, but i thought it just centres the diff??

 

[1991_Vn2nV]

yeah i do have an adj panhard rod, but i thought it just centres the diff??

There was a thread in the VN/VP section where people started complaining about the rear being different heights at one side to the other, and some1 explained how an adjustable rear panhard rod can fix the problem... But I dont remember the explanation... But i'll try to dig it up if I can...

Im sure someone will come along today and either confirm it or correct it anyway..

 

[AGRO_38]

ahh thanks vn2nv!! i will have a look too

 

[STOKED]

The difference inn ride height is only due to the fuel tank being on the right side of the ute hence the longer spring setup (stock)
Mine rides on the chassis so i have no prob LOL:bang: