madgamer2006
New Member
- Joined
- Sep 2, 2007
- Messages
- 89
- Reaction score
- 0
- Points
- 0
- Members Ride
- VY Executive 2003
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
so far
Strips like that are easy to take off, same as normal VR/VS strips as they're not large enough to be held on by too much sikaflex.
Just use a jug of boiling water or a heat gun to soften up the sikaflex then use a stanley knife to cut the edges away until you can grab the strip, then she should just pull off fairly easy.
The leftover just use a caramel wheel.