removing accelerator pedal mount

[LS3VK]

Hi all

This might be an unusual question but does anyone know how to remove the accelerator pedal mount from the firewall? Mine has to go to make room for a fly-by-wire pedal. But I cant see any bolts from within the cab and the outside would be appear to be concealed by the inner wheel well. My workshop manual is silent on this.

Cheers

 

[VK SL 3800]

From memory it has a pin with a circlip one end and the two holes the pin goes through either side of the pedal are on brackets welded onto the firewall.

 

[Smitty]

.. steel bracket welded to the firewall

with a plastic insert that goes over it ...into which clips the pedal pivot

 

[LS3VK]

.. steel bracket welded to the firewall

with a plastic insert that goes over it ...into which clips the pedal pivot

thanks.... the bracket is now gone with the aid of a cutting disc.

 

[Kire Cvetkovski]

Hi all

This might be an unusual question but does anyone know how to remove the accelerator pedal mount from the firewall? Mine has to go to make room for a fly-by-wire pedal. But I cant see any bolts from within the cab and the outside would be appear to be concealed by the inner wheel well. My workshop manual is silent on this.

Cheers

Did u end up mounting DBW pedal and what pedal did u use