Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

removing cluster

Discussion in 'VR - VS Holden Commodore (1993 - 1997)' started by VRSTATO, May 9, 2005.

  1. May 9, 2005 #1
    VRSTATO

    VRSTATO Guest

    Just wondering on how to remove the plastic that covers the speedo and that on the dash cluster without breaking or cracking the plastic
     
    VRSTATO, May 9, 2005
    #1
  2. May 10, 2005 #2
    Fekason

    Fekason Fekason

    Messages:
    650
    Likes Received:
    32
    Trophy Points:
    28
    Joined:
    Mar 8, 2005
    Location:
    Penrith NSW
    Members Ride:
    2013 MY12.5 SV6Z + 2016 MY16 SV6, both manuals
    Fekason, May 10, 2005
    #2
  3. May 11, 2005 #3
    speedotom

    speedotom Auto Instrument Repairer

    Messages:
    77
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    May 3, 2005
    Location:
    Ballarat
    Members Ride:
    2003 V2 CV8-R MONARO
    Two screws on facia up near cluster,

    Now...... :hit: you have to pull the facia out slightly, try and get your fingers behind the facia and gently prise it off, be very carefull around the air vents and clock, because you can easily break the lugs off the air vents. There are a series of clips which are attached to the facia they will come out with a little tug.

    When you have the facia forward just undo the headlight switch, with this undone you can lift the facia up and out of the way.

    Don't forget to release the white plug under the cluster near the fuse box, under two more screws on either side of the cluster and gradually pull the cluster out.

    If you need anymore help just ask

    Tom
     
    speedotom, May 11, 2005
    #3

Share This Page