Removing guard liner

[Ron Burgundy]

I ran over a paint spill a while ago and my driver side guard liners are covered in white speckles...Front and rear.
I tried scarping the **** but it's taking forever...

Has anyone removed these before ?

From what I can see...after removing the wheel these should come out after removing some clips and screws...

I am guessing I can get new ones from Holden...

 

[villn808]

Half Removed and replaced mine heaps when taking bumper off. Just torx screws.

 

[lmoengnr]

Half Removed and replaced mine heaps when taking bumper off. Just torx screws.

The correct size Torx wrench should be in the jack kit.

 

[426Cuda]

I'd try just giving it a hit with some matt black spray paint mate.

 

[stooge]

Matt black would be the easiest solution but yes they come off after a few torx bolts and those annoying plastic clips.

 

[Ron Burgundy]

The liner is charcoal grey. Hitting it with black paint would look like crap. I will try sandpaper to see if it will get rid of it.

 

[greenacc]

Graffiti remover or acetone maybe?
Just be careful using too much acetone might dissolve the plastic so just give each spot a quick wipe.

 

[Ron Burgundy]

Graffiti remover or acetone maybe?
Just be careful using too much acetone might dissolve the plastic so just give each spot a quick wipe.

It's carpet type liner, not plastic

 

[figjam]

Are you Ted Bullpitt re-incarnated ? Take it on dirt road, it will wear off. Geez, I cop flack for taking my wheels off and cleaning the inner side.

 

[stooge]

The liner is charcoal grey.

Color match.
https://www.supercheapauto.com.au/services/in-store-services/paint-mixing