Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

[VZ] Removing VZ V6, 6 speed gear knob

sv6_06

New Member
Joined
Jan 12, 2009
Messages
35
Reaction score
1
Points
0
Location
Campbelltown
Members Ride
VZ MY06 SV6
I throught I would produce this write up as previous research on this site has revealed losts of ripping on the gear stick until it comes free. This is painfully slow, difficult and unnecessary.

1st off remove the dash surround thingy buy removing the 1 screw beneath the radio and unclip it all and get it righ out of the road.

2nd remove the gear boot and cut the cable tie off around the knob, slide it back lower down the shaft.

now get a screwdriver and pry around the base of the gear knob and you will see underneath the black rubber, 4 blue clips, pry them out of the way.

Now just simply lift the knob up and WOLLAH!

I had my gear knob off in under 10 minutes. I will detail pictures when i get the time.
 

Labz2233

New Member
Joined
Dec 10, 2011
Messages
1
Reaction score
0
Points
0
Location
Sydney
Members Ride
VZ Storm Ute
Thanks so much, that made my life a bit easier... took me about 15 minutes and I'm in now way gifted car wise...
 
Top