Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Resetting SDM

1

1VTACCLAIM3.6

Guest
Does any one know if shorting pin 3 and pin 1 on the plug for the tech2under the steering colum actually resets the SDM or breaks it???

Pin 3 is where the SDM communicates with the PCM and ECU blah blah
but i think pin 1 is possiably earth but not sure , either way if Pin 1 is earth then i dont think it would be good for the SDM if it is shorted to earlth

Cheers if anyone can help :yeah:
 

accentstencil

Well-Known Member
Joined
Jun 30, 2005
Messages
8,376
Reaction score
586
Points
113
Age
71
Location
Caboolture South, QLD
Members Ride
WH II Caprice, 5.7 2018 Equinox LTZ V
After doing a search I found you can only reset the SDM with a tech 2, but I would like to know what SDM stands for if anyone knows.
 

accentstencil

Well-Known Member
Joined
Jun 30, 2005
Messages
8,376
Reaction score
586
Points
113
Age
71
Location
Caboolture South, QLD
Members Ride
WH II Caprice, 5.7 2018 Equinox LTZ V
Doctor Bob said:
Sensing Diagnostic Module
Thanks for that. I did a search but it was always refered to as just the SDM.
 

EXCESSV

New Member
Joined
Sep 27, 2005
Messages
1,015
Reaction score
11
Points
0
Age
39
Location
Perth, WA
Members Ride
VE SSV
from gregory manual it say 6 is earth because if you want to see fault codes you bridge 5 and 6. 5 is diagnostic and 6 is earth.

not sure if you can reset the SDM like that
 
Top