Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Rims + Tyres Sv6 2010 Holden Commodore VE

Glack

New Member
Joined
Apr 1, 2013
Messages
8
Reaction score
0
Points
0
Location
Australia
Members Ride
2010 VE Holden Commodore Sedan
Hey guys whats up
Im looking at getting a set of Black 20" DTM shines for $1400 and finishing it off with a set of Kumho Ku31s looking around $760 dollars
I'd like to ask a question as to whether 20x9 front and 20x10 rear rims will fit on a 2010 Ve sv6 commodore

Thanks!
 

mikey-

Member
Joined
Mar 25, 2013
Messages
225
Reaction score
4
Points
18
Location
Perth, WA
Members Ride
VE SS Sportwagon
Without knowing the wheel offset it is not possible to say if those wheels will fit...

With the correct offset, 20x9 can fit up front and 20x10 can fit in the rear.
 

Glack

New Member
Joined
Apr 1, 2013
Messages
8
Reaction score
0
Points
0
Location
Australia
Members Ride
2010 VE Holden Commodore Sedan
Without knowing the wheel offset it is not possible to say if those wheels will fit...

With the correct offset, 20x9 can fit up front and 20x10 can fit in the rear.

This is the offset 20X9 FRONT 20X10 REAR

45-OFFSET FRONT AND REAR 5/120 66.8 CENTRE BORE
 

Glack

New Member
Joined
Apr 1, 2013
Messages
8
Reaction score
0
Points
0
Location
Australia
Members Ride
2010 VE Holden Commodore Sedan
Ok sweet
Im kind of a newbie to car mods and things. Because the offset is 45 for both front and rear, i won't be able to fit tyres that are 245/35/20? or will it work? Sorry
 

mikey-

Member
Joined
Mar 25, 2013
Messages
225
Reaction score
4
Points
18
Location
Perth, WA
Members Ride
VE SS Sportwagon
245/35/20 should be fine in the front, I'd put something wider like a 275/30/20 on the back though...
 

Glack

New Member
Joined
Apr 1, 2013
Messages
8
Reaction score
0
Points
0
Location
Australia
Members Ride
2010 VE Holden Commodore Sedan
ok thanks for the info
im kind of thinking otherwise now about these rims, i want to get something that can fit same tyres back and front just in case of emergency situations etc
 

Sean880

Well-Known Member
Joined
May 14, 2009
Messages
1,192
Reaction score
185
Points
63
Location
VIC / NSW
Members Ride
2012 VE SV6 ser 2 and 911 Porsche Carrera S 997
This is the offset 20X9 FRONT 20X10 REAR

45-OFFSET FRONT AND REAR 5/120 66.8 CENTRE BORE

1. Make sure the wheels you are buying have the 5 x 120 stud pattern or they will not fit obviously. ( PCD 5 x 120)

2. I have seen the “experts” claim 2 different VE hub measurements – one being 66.9 mm. (the other 66.7). Check the hub size on your car because if it is 66.9 mm, the wheel with a 66.8 mm centre bore is not going to fit over a 66.9 hub. Many after market wheels have a larger centre bore than this.


3. 9 inch wide FRONT – a 45 mm offset wheel will fit and you can fit either a 255 35 20 or 245 35 20 tyre. The 255 tyre will have a slightly higher tyre wall (profile) but provide a little more tread width.

4. 10 inch wide REAR – with a 45 mm offset - you will need a 275 30 20 tyre for this wheel to give you the correct tyre diameter for the car and the correct tyre width for the rim. This fitment is going to push the package a further 18 mm approx out towards the edge of the rear guard compared with the standard factory set up on the SV6 with 18 x 8 inch wheels (48 offset) and 245 45 18 tyres. Most likely with full suspension travel the outside face of the tyre will scrape the inside lip of the rear guard . It will be a very marginal fit but I think you will find the tyre face rubs the guards with enough suspension travel. In that event you would need to have the lips on the rear guards rolled up so they did not foul the rear tyres. ( If you fit the 9 inch rims with 45 offset to the rear with 255 35 20 tyres you will not have any rubbing issues to worry about).
 

ducker85

Well-Known Member
Joined
Oct 10, 2008
Messages
2,674
Reaction score
31
Points
48
Location
Narnia
Members Ride
09 VE clubbie R8
HSV wheels are 20x8.5 +36P offset 245/35R20 tyres and 20x9.5 +57 offset 275/30R20. I just checked the E3 GTS's i pulled off my car yesterday!

use a online offset calculator to double check before you buy them if in doubt
 
Top