Jezza91
New Member
- Joined
- Jun 17, 2022
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Age
- 32
- Location
- East Gippsland vic
- Members Ride
- VT holden
Can someone please tell me where the rubber lpg mixer hose go too off a VT V6 please ?
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
I don't know what brand of LPG mixer you have, but typically there is a small hose that goes to PCV and a wider hose that goes to electrically controlled valve between the mixer and converter. If it is Impco, they had extra hoses, I am not familiar where the spaghetti went.Can someone please tell me where the rubber lpg mixer hose go too off a VT V6 please ?
Yes its the vacuum hose and sits under the throttle body (few inches back). It blows off quite often with backfires and will cause rough idling when not connected. The nipple can be in a different spot but I need a better photo. Take one under throttle and on each side closer. Is the plenum original to the gas system ?This is the hose I be talking about, can't fined anywhere for it to go? It is a impco lpg system. Car won't idle properly without it blocked off. Its running on petrol only as it hasn't ran on gas for years