Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Sandmans' VZ S

Sandman

Challenge Accepted
Joined
Apr 8, 2013
Messages
1,348
Reaction score
454
Points
83
Age
25
Location
Melbourne
Members Ride
HQ VC VZ
Just casually driving a bar through the middle of school today.
 

Sandman

Challenge Accepted
Joined
Apr 8, 2013
Messages
1,348
Reaction score
454
Points
83
Age
25
Location
Melbourne
Members Ride
HQ VC VZ
Finally got it lowered a couple of weeks ago with Bilsteins and H&R springs. So much nicer to drive now than it was before.
 

Sandman

Challenge Accepted
Joined
Apr 8, 2013
Messages
1,348
Reaction score
454
Points
83
Age
25
Location
Melbourne
Members Ride
HQ VC VZ
These goodies arrived for me on monday and gave them a test run last night. The snow foam is so much fun to use and removes the main muck really easily. The Dodo red mist gives a realy nice shine too, only thing is it smells like medicine.
 

Attachments

Sandman

Challenge Accepted
Joined
Apr 8, 2013
Messages
1,348
Reaction score
454
Points
83
Age
25
Location
Melbourne
Members Ride
HQ VC VZ
Not a great deal more happening with the car, though I am getting more used to using the snow foam. Got a good workout removing the colony of bugs that resided on my front bumper after my trip to Port Fairy a couple of weeks back. Also finally git the chance to try out the meguiars DA polisher out to. Used it to apply some Bowdens wax to the bonnet. Was a little odd to use at thw start but got easier quickly. It was a not always the easiest to keep the drill upright but theres not too much that can be changed there with it being a drill attachment. Either way was much quicker and easier than hand waxing and gave a good even result (pic is grainy as I ran out of light).


This is the reason I normally reverse in everywhere, cleared the curb by about 4mm.

In the last few days I finally got round to replacing the RF bumper mount, its always been dodgy and caused the bunper to sag and you can see the difference between the old and the new the old had a fair bit missing as well as having a 2 inch fencing screw holding the bumper into it. So the sag is a bit better so I can get into my driveway properly again, though I want to try and pull the bar up a bit further as its still a bit saggy.

Whist doing the oil pressure sender the other day gave the bay plastics a degrease and a go of 303 Aerospace, came up a treat with minimal time and effort. Also for referece to remove the oil pressure sender you need a deep 27mm socket
Before and after the clean



Sent from my GT-I9507 using Tapatalk
 

Sandman

Challenge Accepted
Joined
Apr 8, 2013
Messages
1,348
Reaction score
454
Points
83
Age
25
Location
Melbourne
Members Ride
HQ VC VZ
Not bad for $33


Sent from my GT-I9507 using Tapatalk
 

VRStato64

Member
Joined
Jul 21, 2009
Messages
137
Reaction score
1
Points
18
Location
Eastern Suburbs
Members Ride
VY SS II 6 speed
Man at that price you should if got 2!

Sent from my GT-N7105 using Tapatalk
 

Sandman

Challenge Accepted
Joined
Apr 8, 2013
Messages
1,348
Reaction score
454
Points
83
Age
25
Location
Melbourne
Members Ride
HQ VC VZ
I had to chase to get this one. But I did get one for a VN-VS to sell off though haha

Sent from my GT-I9507 using Tapatalk
 

thatbrynguy

New Member
Joined
Feb 14, 2012
Messages
109
Reaction score
1
Points
0
Location
Adelaide, SA
Members Ride
2003 VY Commodore SS 5.7L M6
ImageUploadedByTapatalk1392004639.503768.jpg

That is a beautiful ute mate. Well done. I love your approach. Genuine Holden wheels. Lowered properly not just slammed for the sake of it. A few well executed personal touches and take the time to keep it in mint condition is all it takes to really set it apart from the crowd.

Would love to see more guys your age treating their Holden's like this.

Top work.


Sent from my iPhone using Tapatalk
 
Top