OZ38
Member
- Joined
- Oct 19, 2004
- Messages
- 374
- Reaction score
- 15
- Points
- 18
- Age
- 62
- Location
- Jurien Bay WA
- Members Ride
- VS L67 T5 SDN & VY V6 M35 UTE
Hi All,
A long time back I saw someone was fitting the later model VT-VY Rear hand-brake set up on to the VR-VS Live Axle diff.
I would like some info about this if anyone remembers this or did this.
I bought a Big Brake kit off ebay years ago & fitted 315mm rear discs. The discs were modified VT-VY discs & had a great big heavy arsed spacer block welded on the inside of the discs for the smaller diameter VR-VS handbrake to push against.
I want to replace my discs now & these big brake options are no longer available. So if I convert my handbrake to the VT-VT diameter I can just buy VT-VY rear discs & run happily with out the heavy spacer block thing. As well I wont have to weld them on to new discs.
Cheers
Deek
A long time back I saw someone was fitting the later model VT-VY Rear hand-brake set up on to the VR-VS Live Axle diff.
I would like some info about this if anyone remembers this or did this.
I bought a Big Brake kit off ebay years ago & fitted 315mm rear discs. The discs were modified VT-VY discs & had a great big heavy arsed spacer block welded on the inside of the discs for the smaller diameter VR-VS handbrake to push against.
I want to replace my discs now & these big brake options are no longer available. So if I convert my handbrake to the VT-VT diameter I can just buy VT-VY rear discs & run happily with out the heavy spacer block thing. As well I wont have to weld them on to new discs.
Cheers
Deek