Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Series 1 engine into vr

lemsua

Apple Eater
Joined
Nov 26, 2008
Messages
13
Reaction score
0
Points
0
Location
NZ
Website
www.ahoythere.co.nz
Members Ride
VN Exec S1 3.8
I know there is a thread about this already but I have a series 1 vn engine that wants to go into a vr

have full vr loom and everything and vn loom and ecu, will use vr auto

is it doable or just to much messign around?
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,993
Reaction score
433
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
you need to add the cam position sensor which means the front timing cover and trigger on the camshaft as well to run the auto ecu and tunes for vr so you can run the box.and the tune is way out for the vn engine will not go very good and will use more gas.
 

lemsua

Apple Eater
Joined
Nov 26, 2008
Messages
13
Reaction score
0
Points
0
Location
NZ
Website
www.ahoythere.co.nz
Members Ride
VN Exec S1 3.8
Cheers for that, can i not use the vn ecu so the tune is all good?

no offense but the bold text in your signiture is rather...err....bold ;)
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,993
Reaction score
433
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
no cause you are VR auto and it needs the vr auto ecu to control it
 
Top