Hey i know i think iv posted this before, but can anyone please help me stop things in my car rattling and squeaking and ****, i just want 1 vn in the entire world to not rattle and squeak, if anyone know any cause of any squeak please dont hesitate to tell me...
I put some masking tape along the bottom of the door. A squeak that had me stumped for 6mths. It must have been the door seal against the door trim. The centre console screws at the front stopped the dash rattle. There ya go 2 to try for a fix. Almost rattle free VN.
My VN squeaks and rattles alot, thats where you turn upthe stereo, what rattles, lol... My front doors squeak, i might try that fix on mine. thanks.
mines fairly rattle free, just go through the whole dash and console and tighten up all the screws... and maybe replace the pins in both the front doors that will stop the squeeking.
yeah i tightened most screws and ****, but didnt do nething, im looking for the masking tape awnsers lol, thanks peoples
Found a squeek the other day - look like it was the bonnet latch put some grease on it and it was gone. It sounded like it was comming from the door or from the arial region - but the latch was it.
I don't really suffer from rattles... just deafening road noise. There's stacks of wind shear around all the windows, and all the bottom window seals have fallen into the doors... doesn't help. I'll need to get some new ones.
To fix the window seals I ran some Selleas' All Clear along the hard plastic bit and taped the rubber/felt bit in place. Left it to dry over night and they are still good. (fixed over 12 months ago). This will stop the glass rattle. U gan probable get some good glue but I just used what I had in the shed.
ive got a strange rattle, its only there some days.... it sounds like its in the drivers side rear of the engine bay, ive done almost every thing to find it the next step it so pull the gaurd off and have a look. if i dont find it ill go nuts
There's not much behind the gaurd. I took mine off and nothing. It was a loose bonnet catch - a few turns with a spanner and the rattle was gone for a while. Only to return a few months later. Grease on the latch - silence again.