Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

standard VZ Spring length

Discussion in 'VZ Holden Commodore (2004 - 2006)' started by avery1995, Nov 2, 2012.

  1. avery1995

    avery1995 New Member

    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Nov 2, 2012
    Location:
    Wyalkatchem WA
    Members Ride:
    07 VZ SVZ
    i have a stock VZ SVZ Ute and i am wondering what the standard length of the front and rear springs are??
     
  2. CONROD

    CONROD Member

    Messages:
    550
    Likes Received:
    5
    Trophy Points:
    18
    Joined:
    Jul 23, 2012
    Location:
    SOMEWHERE in the land of OZ
    Members Ride:
    VZ SS THUNDER 6.0l 6 Sp
    Hey mate the following measurements are for the original FE-2 springs out of my VZ SS Thunder;
    Front;---part #-92048200
    code on tag--HK
    length--345mm

    Rear;---part #-92048209
    code on tag--EL
    length--280mm

    These measurements were taken with the spring standing on its end and tape measure passed down thru the centre of the spring and its end resting on the concrete floor and a straight edge place across the top.

    Note;; These measurements are from new almost unused springs.Springs that have been in use for a period of time could differ from those given

    Hope that helps you out mate,
    Cheers CONROD
     

Share This Page