"Start ya Ba*tard!" Kind of a problem but not really..

[electric_monk]

Hey I've been fiddling with the float level on my varajet and was wondering what distance you've put between the top of the carby and the top of the float, I put around 8mm at the moment. Although it is a rough measurement.

 

[85berlina]

8mm is the correct float level.
I found when I rebuilt my carby that you have to be very accurate, so, be very accurate!

 

[jake87]

when i rebuilt mine the paper that came with the carb kit said to have 6mm

 

[85berlina]

My Gregories and Max Ellery manual both say 8mm and mine is running great at the moment, I found that anything else other than 8mm and it would run bad.

 

[Goon]

Yeah that 6mm by the people who made the carby, but by holden it was more likely and is 8mm

 

[jake87]

ok cool thanks. in that case ill rip my carb off tomorro