Start ya bastard

[SLE 500]

Hi guys. Im struggling to restart my project. Its a Vh Sle with a EFI 5L. I've redone the interior and changed a lot of the dials, switches and buttons.

I have an ignition switch and push start button. The fuel pump primes and engine turns over but no spark. I moved the ignition module while cleaning up the engine bay but i don't know if its that. I have a test light and voltmeter but my knowledge and patience are at their end.

Also i cut out the immobiliser and rewired direct to ignition.

Anyone got any thoughts?

 

[Not_An_Abba_Fan]

Are you sure it's no spark and not no injector pulse?

 

[Darren_L]

so was it running before you mucked around with it or is this it's first start ?
If it was running before, which changes did you make ?

You mentioned you re-wired the immobiliser straight to the ignition... what immobiliser are you referring to ? An aftermarket job or the immobiliser wire on the ECU ?

 

[SLE 500]

The car used to run. The alarm/imobilizer was a python. I had a spark plug pulled out but it didn't have a spark jump across it.


Sent from my GT-I9100 using Tapatalk 2

 

[VR38]

No spark.
Are you getting power to the coil?