VL Berlina 5speed
Apprentice Panel Pusher
- Joined
- Oct 3, 2005
- Messages
- 2,684
- Reaction score
- 30
- Points
- 0
- Age
- 35
- Location
- Adelaide
- Members Ride
- Project VL Show car, VS Exec, VY Ute, YZ250F
my car is starting to misfire again,
last time i tracked it down to dirt points on the inside off the dissy cap, it was liek a hard white powder etched onto the points and when i sanded it off it ran fine, so i chuckd the spare dissy on and it has happned to it now,
what would be causing this?
my old man says it could be taht the roter is to close and not giving ample room to arc proberly causing it to crust over...
^ is that sounding right or any1 know the cause of it
and when CAS are stuffd do they give off a strong orange colourd powder or is it white?
last time i tracked it down to dirt points on the inside off the dissy cap, it was liek a hard white powder etched onto the points and when i sanded it off it ran fine, so i chuckd the spare dissy on and it has happned to it now,
what would be causing this?
my old man says it could be taht the roter is to close and not giving ample room to arc proberly causing it to crust over...
^ is that sounding right or any1 know the cause of it
and when CAS are stuffd do they give off a strong orange colourd powder or is it white?