hey guys and girls i have a question about my sub woofer, this may be something you have had happen or know what to do. Every time i turn on my head unit to listen to music my subs go THUMP!! and i have tried quickly turning down the volume but it still does it. does anyone know what i may need to do like a capacitor or resistor to absorb that unwanted surge of power or something. if anyone knows what to do that would be great thanks guys.
You'll have to give us more info on the system, what components etc. Could be a few things, is the remote wire for the amp connected to the remote (blue wire) on the head-unit?
This problem is usually caused by the amps turning on before the h/u, this can usually be fixed by the following solutions: 1. Put a switch inline of the remote wire (blue blue/white) so that you can manually turn on the amps each time 2. Get a decent h/u that does this automatically, it doesnt turn on the amp for about a second after the h/u has turned on. (all alpine h/u's iv'e owned have done this) 3. Go to jaycar and get kit that does it, its around $15 and goes inline teh remote wire and just holds of the power for a couple seconds and is adjustable which is always good.. Anyone of these should fix you problem. cheers, smit
go with number 1 or 3 your right its just a surge of current just get a switch and it should be fine.
yeah okay these are all good solutions guys thanks alot. by the way I'll be honest about the info on my equipment it's all beginner stuff the cheapest of everything. Jenson touchscreen head unit the amp is us audio mono 800wpeak running into 2x100wpeak us audio 12" bridged subs. that's for the info on the equiptment but I'm in Victoria and kinbike_rider did you say Jcar as in the place in ringwood with the gold VT that sits on the ground out front?
This is what you need: Universal Speaker Protection and Muting Module Kit - Jaycar Electronics cheers
yeah cool I'll go up there when i get a minute it's like 20mins away from me which is handy thanks for that
