Suspension question

[cbr1234mike]

i Fitted super low king springs and lowered shocks. The car still has the factory stance(higher at the rear). Upon talking to a guy at pedderes he says they can tune the suspension so the car sits evenly. How do they do this?!? i cant find anything on how to do it, even in the manual.

 

[Jonno]

probobly heat the spring up and compress it

 

[PanthaVS]

probobly heat the spring up and compress it

if they do that... they would be anealling the springs (permanent softening) which alters the heat treatment of the metal.

so i would hope thats not what they do...

 

[tosue]

anyone who puts a blade or heat to springs is a fool,
you are asking for trouble,the spring cannot do its job properly now

 

[Krilnik]

They plug a computer into the spring continuum transponder unit and tune to desired height.

All good.

 

[clubsport-r8]

Even superlows all round will leave the the rear slightly higher then the front, normally if you want the rear even or a littler lower then the front, you go superlow front and ultras rear.

 

[adrian123443]

How long have they been in the car? brand new springs can take a week or two to settle to the right height

 

[Not_An_Abba_Fan]

They will bake the springs, reset them and then retemper them.

Done properly it is not dangerous at all and is the standard practice for resetting all types of springs.