Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

swapping auto loom to manual loom

macksvt

New Member
Joined
Oct 1, 2008
Messages
92
Reaction score
0
Points
0
Members Ride
vt
ok,

my car had a manual conversion, but they stupidly didnt put the manual loom/computer in.

ive purchased a loom/computer to suit, im just wondering how much labor is required in having it installed ?

does the dash need to be removed ??
 
Last edited:

DannyboyDS

Just hand me the pliers.
Joined
Feb 26, 2007
Messages
2,255
Reaction score
38
Points
0
Age
39
Location
Melbourne
Members Ride
VS Berlina
I don't think you will need to pull the dash off, but be prepared to pull all the plugs off of your engine, could be done in a day without too much effort.
 

clubby_you

New Member
Joined
Mar 15, 2009
Messages
193
Reaction score
0
Points
0
Location
brisbane
Members Ride
vs clubsport
i did this on my clubby a few months back took me and a mate about 2 hours if that. no to dash out but i had to cut one wire that went to the ac from memory but i just cut it and joined it under the dash not a hard job just give it a go
 
Top