EdPreece
New Member
- Joined
- Mar 16, 2013
- Messages
- 20
- Reaction score
- 0
- Points
- 1
- Age
- 32
- Location
- Tamworth, NSW
- Members Ride
- 2003 VY SV8
Ok so I've bought a SAAS wooden wheel with a boss kit - which hopefully will arrive in the mail on Tuesday.
I was looking at the standard wheel which is in the car now and was wondering how the hell to remove it. I saw two bolts on the bottom of the wheel - are these all that are holding it in?
When I'm removing it - do I need to worry about the air bag going off in my face?
Do I just yank it off or should I wiggle it gently?
Anything else I need to do or not do when I'm taking the old one out?
Thanks in advance for your help,
Ed
I was looking at the standard wheel which is in the car now and was wondering how the hell to remove it. I saw two bolts on the bottom of the wheel - are these all that are holding it in?
When I'm removing it - do I need to worry about the air bag going off in my face?
Do I just yank it off or should I wiggle it gently?
Anything else I need to do or not do when I'm taking the old one out?
Thanks in advance for your help,
Ed