Sway bar d bush dimensions

[Just holden together]

Hi guys, I’m having trouble figuring out what size “d” bushes I need for the missus ve sv6 series 2. I’m assuming it’s the 23mm, but you know what that say about assuming.
any help is much appreciated. Cheers

 

[lmoengnr]

Hi guys, I’m having trouble figuring out what size “d” bushes I need for the missus ve sv6 series 2. I’m assuming it’s the 23mm, but you know what that say about assuming.
any help is much appreciated. Cheers

Borrow some calipers and measure it to be sure, it will be based on the suspension package on the SV6(FE2?).
The sway bar on my FE3 Redline is 24mm.

 

[krusing]

My 2012 VE L77 Calais Wagon front sway bar is 24mm

I replaced mine earlier in the year, after finally finding the annoying clunk,
I purchased SuperPro Bushes and its nice an quiet again.

 

[VE_WagonII]

Ring Holden parts give them the VIN and they will be able to advise. Then you can go GM or aftermarket.

 

[goldvn05]

if you have vernier caliper just measure the diameter on sway bar from engine bay or jack up car and do from bellow.

The following is only if youhave factory bushes, if you can access and unscrew the shell cover over the DBush and remove the bush...assuming its factory original (mine was) , it also is stamped on the rubber bush the diameter...(this was the case on mine and they were original factory ones)

I basically measures bar with calipers and ordered it...but also conformation was on the original factory bush also(noticed that after on removal)