It takes just a moment to join our fantastic community
Discussion in 'Spray Painting and Panel Beating' started by Joopjbc89, Nov 19, 2019.
What sandpaper do I use to bring it back to original paint or even the prime area?
why do you want to do this??
Coz this thread
i would probably start with 400 on an random orbital and go to 800 then respray again.
I need all the help I can get
I appreciate it
with a proper spray gun and compressor, hire one if you havent got one. get acrylic base coat with ISO FREE 2 pack clear youll be laughing.
Have you tried Google and Youtube ?
Most good auto shops mix paint these days but if you can find one, a specialist auto paint supplies shop might be better.
So I have a 2008 calais phantom black
Do I need to get any particular part like with a gloss?
i got mine from http://www.autonindustry.com.au/ and got it sent to me as nowhere in cairns could supply what i wanted ISO free.
phone them ask them and youll be good to go.
i got a few litres of acrylic phantom black and 4 litres of ISO Free 2 pack clear, same will go over your sanded painted surface not down to metal.
Cheers yeah need to get it done soon
So take the paint back with 280 grit?
No way use 280, you will be forever sanding out the scratches. 600 wet and dry and then 800 before primer.
Separate names with a comma.