Ivan Manterola
New Member
- Joined
- Sep 22, 2021
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Age
- 46
- Location
- EMERTON
- Members Ride
- VK Commodore
Will a Th400 fit into a vk commodore
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Th400 in vk commodore
- Thread starter Ivan Manterola
- Start date
Smitty
Moderator
- Joined
- Oct 21, 2003
- Messages
- 2,433
- Reaction score
- 1,617
- Points
- 113
- Location
- Bayside Melbourne
- Members Ride
- GenF SV340 R8 Tourer, VK race car, ZX12R
.. with a big enough hammer, anything is possible 
sire01TMK
Active Member
- Joined
- Nov 22, 2005
- Messages
- 177
- Reaction score
- 41
- Points
- 28
- Age
- 47
- Location
- DARWIN, NT
- Members Ride
- 84 VK 308
It should fit as I'm sure they came out in some early VB's iirc.
sire01TMK
Active Member
- Joined
- Nov 22, 2005
- Messages
- 177
- Reaction score
- 41
- Points
- 28
- Age
- 47
- Location
- DARWIN, NT
- Members Ride
- 84 VK 308
The OHV engines were largely carried over from the Kingswood: a 2.85-litre 64-kilowatt (86 hp) straight-six, 3.3-litre 71-kilowatt (96 hp) straight-six, 4.2-litre 87-kilowatt (117 hp) V8, which was also available with dual exhausts to produce 96 kilowatts (129 hp) of power, and a 5.0-litre 114-kilowatt (153 hp) V8, which in dual exhaust form was rated at 125 kilowatts (168 hp). The engine blocks on these motors were painted red and are therefore commonly referred to as the Red motors. The VB was also available with either a four-speed manual transmission or a three-speed Trimatic automatic transmission, or the Turbo-Hydramatic 350/400 automatic transmission with the 5.0-litre V8.