Loxton
New Member
- Joined
- May 20, 2009
- Messages
- 1
- Reaction score
- 0
- Points
- 0
- Members Ride
- VR Calais V6,VL Belina V8
myself and a mate (mischa)
there are 3 options.
Find a Manual Vr Computer And Loom
Get the auto Mem-Cal Re tuned to run the manual Gearbox
Use the Manual Computer and Loom out of a vn-vp commodore which will still require a re programming of the mem cal
First of all good work on the write up.
i have a question about using the a VN-VP ecu/memcal and loom in a VR. Why does it need to be re-programmed?
I own a vr v6 calais and brought a complete Vp with a manual. did the whole conversion on the weekend but the loom and ecu. runs fine but i ended up with 8 engine codes which i know i would.
Should i use the VP loom and ecu/memcal Or just get a new ecu programed for manual with (as they say +17 HP) for around $150-$200
or send mine off and get that done.
And if so where can i get this done in SA?
the speed sensor and back up switch Im not concerned about at the moment.
any help appreciated and thanks in advance