Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
///The Euro I4 Project
- Thread starter hakhawk
- Start date
- Joined
- Jan 18, 2005
- Messages
- 6,337
- Reaction score
- 128
- Points
- 63
- Age
- 38
- Members Ride
- BMW E21 320i, E36 "318IS" coupe
Jesterarts
Your freedom ends where mine begins
- Joined
- Nov 22, 2005
- Messages
- 3,817
- Reaction score
- 105
- Points
- 48
- Age
- 38
- Location
- Victoria
- Members Ride
- 2010 Nissan X-Trail ST-L
####ing! Jerks! ####s!
I got all excited that there was an update on this but no, nothing.
Jerks.
I got all excited that there was an update on this but no, nothing.
Jerks.
- Joined
- Jan 18, 2005
- Messages
- 6,337
- Reaction score
- 128
- Points
- 63
- Age
- 38
- Members Ride
- BMW E21 320i, E36 "318IS" coupe
just to piss you all off, its an update with no significance
i got given a new wheel in exchange for doing some wiring for a mate, but it turns out its snapped internally at the rhs spoke, but now i know how it looks and feel with some dish and that style, so i'll purchase another wheel in the same style.
once i have some room in the shed, i can measure up rear axles and get them made. im still trying to decide what i do with cv's, whether i use the holden ones i have, or go something else, as with the adapters, theres not much angle left. but it may be enough with the suspension travel.
i got given a new wheel in exchange for doing some wiring for a mate, but it turns out its snapped internally at the rhs spoke, but now i know how it looks and feel with some dish and that style, so i'll purchase another wheel in the same style.
once i have some room in the shed, i can measure up rear axles and get them made. im still trying to decide what i do with cv's, whether i use the holden ones i have, or go something else, as with the adapters, theres not much angle left. but it may be enough with the suspension travel.
HERONVY
New Member
- Joined
- Jul 8, 2011
- Messages
- 586
- Reaction score
- 5
- Points
- 0
- Age
- 31
- Location
- Steel city
- Members Ride
- 2003 VY2 SS
Nardi or gtfo
Wont have any snapping issues if the real thing is bought
:thumbsup:
Sent from my GT-I9300T using Tapatalk
Wont have any snapping issues if the real thing is bought
:thumbsup:
Sent from my GT-I9300T using Tapatalk
yZoH
//There Ain't No Rest For The Wicked...
- Joined
- Jul 5, 2004
- Messages
- 4,559
- Reaction score
- 103
- Points
- 63
- Location
- S/E Subs, Melb
- Website
- www.lolwut.com
- Members Ride
- (0.o')
I think we need to truck bed liner your whole floorpan. Strong, Look good, Cover up ton of the rough patches/imperfections.
- Joined
- Jan 18, 2005
- Messages
- 6,337
- Reaction score
- 128
- Points
- 63
- Age
- 38
- Members Ride
- BMW E21 320i, E36 "318IS" coupe
so a bit of a play with the recaros today, bought some rails from work, one hole and some modification to the slider bar and they fit perfectly!!
comparison to the mx5 seats that i had in it. the mx5 seats are a kg or so heavier. might throw them on the corner scales for laughs oneday
and sitting in the car. the holes in the rail surpisingly line up with the oem holes, but the rails are ~20mm too narrow, so need to make a plate to widen it just a little bit.
comparison to the mx5 seats that i had in it. the mx5 seats are a kg or so heavier. might throw them on the corner scales for laughs oneday
and sitting in the car. the holes in the rail surpisingly line up with the oem holes, but the rails are ~20mm too narrow, so need to make a plate to widen it just a little bit.