Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

The VE Commodore Wheel Fitment Guide**UNDER CONSTRUCTION**

Liam85

Member
Joined
Sep 6, 2016
Messages
57
Reaction score
15
Points
8
Age
38
Location
Sydney
Members Ride
Holden VF ssv ute manual
Back has been lowered. Front is stock height for a VF but isn't to bad. May lower it slightly more. Back sits just above the wheel so would be good clearance. Love some poke. Used to have an fg xr6 turbo running 10.5s. Great poke! Haha
 

mitchy_

Member
Joined
Nov 12, 2014
Messages
70
Reaction score
28
Points
18
Age
37
Location
QLD
Members Ride
Senator SV08
anyone running 11's on the rear? tossing up between 10's all round, or 10" up front and 11" rear.
 

soleit

Member
Joined
Oct 16, 2011
Messages
153
Reaction score
5
Points
18
Location
Laurieton
Members Ride
09 VE SS-V
Thread dig time. So I have some LEXANI LSS55 4 20x10, 2 40 offset and 2 35 offset. I put them on my 09 SSV then back off as I was worried about the tiny poke past the front guard. It's like a whole mm, nothing drastic but still had me worried with the cops around here. Small town, small mentality cops with nothing to do but bust cars for minor things. According to this thread, the 35 is fine on the front, correct?

Really hope so, I love these wheels!
 

ducker85

Well-Known Member
Joined
Oct 10, 2008
Messages
2,685
Reaction score
38
Points
48
Location
Narnia
Members Ride
09 VE clubbie R8
20x10 35P is needed to clear the strut. A 20x10 40P rim will hit the inside of the rim/tyre on the struts. The 20x10 35P should tuck but if not and you really worried about a few kilometres, get a slight guard roll to fix any concerns.
 

soleit

Member
Joined
Oct 16, 2011
Messages
153
Reaction score
5
Points
18
Location
Laurieton
Members Ride
09 VE SS-V
Yeah I'll put the 40 on the rear and get the front pulled for the 35, only worry is are they legal once under the guard? Would it affect track too much legally?
 

ducker85

Well-Known Member
Joined
Oct 10, 2008
Messages
2,685
Reaction score
38
Points
48
Location
Narnia
Members Ride
09 VE clubbie R8
Once the wheels are on get a mate to help you measure the track. It's meant to be centre to centre of the wheels but an easier way to measure them is to, hold the tape measure on the inside of one wheel while on the other side take the measurement on the outside of the wheel. HSV pentagons are 20x8.5 36P so really the track should be the same.
 

ruredi

AVGJO3
Joined
Jul 17, 2005
Messages
478
Reaction score
5
Points
18
Location
Melbourne
Members Ride
'12 SS V Z Series Manaul Sportwagon
Just wanted to add my fitment to assist with the info...

Koya SF06

Front: 20 x 9 +35 running 245/35
Rear: 20 x 10 +45 running 275/30

Had the rear guards "ground / trimmed" instead of rolled as I didn't want to risk damaging paint (as this is common on wagons). This does not give as much clearance as rolling but it has not scrubbed once and I've purposely hit some big bumps at speed trying to make it hit and it doesn't.

Running Bilstein B8's and King KHFL-150SSL (Super Low) and KHRL-152SSLHD (Ultra Low).

370mm HTG in the front and 350mm HTG in the rear.

Will clear front AND rear Brembos no worries! PLENTY of clearance.


14975713_1887401308154425_1824161765_o.jpg
 
Last edited:

Simone mcvittie

New Member
Joined
Nov 25, 2016
Messages
2
Reaction score
0
Points
1
Age
45
Location
Newcastle
Members Ride
Ve omega dual fuel sedan
Hi i just got a set of 22,s and put them on the front of my ve and they seem to just fit i can fully turn the wheels they are about half a centremetre off my springs but i jumped up and down on my bonnet and i dont seem to hit will they hit and take a chunk out or will they be ok does anyone know?also will i need a spacer they fit on the front without one already but they were only on the car and the wheel turned i never drove with them on..
 

VE LOWLIFE

New Member
Joined
Feb 8, 2017
Messages
1
Reaction score
0
Points
1
Age
37
Location
South Australia
Members Ride
VE SSV UTE
20"x10.5
275x30
Not sure of offset
Guards req rolling and some grinding :)
 

Attachments

  • IMG_4727.JPG
    IMG_4727.JPG
    296.3 KB · Views: 626
  • IMG_4723.JPG
    IMG_4723.JPG
    129.2 KB · Views: 633
Top