DG355
Member
- Joined
- May 12, 2019
- Messages
- 95
- Reaction score
- 34
- Points
- 18
- Location
- Wagga Wagga
- Members Ride
- VS ute 355 + VF Clubby W375 + ZB RSV
Putting a thermofan in. I have a switch that switches on at 195 and off 185.
Just looked at my radiator it has ports where the switch can be mounted but they are on the side opposite the return from the motor.
The ends of the radiator are plastic so not an option to weld in a port. Is it an option to get a lower temp switch and use the existing port? If so what temp?
It’s been suggested by a few people to run it all the time but others say no.
Just looked at my radiator it has ports where the switch can be mounted but they are on the side opposite the return from the motor.
The ends of the radiator are plastic so not an option to weld in a port. Is it an option to get a lower temp switch and use the existing port? If so what temp?
It’s been suggested by a few people to run it all the time but others say no.