Tripin'...

[Haydz]

just to clarify . the ks are held in the lcd board at the bottom of the cluster changing that part will make the car say it has done. more or less ks than original

 

[gendi]

ok i decided to have a go at install a L3 into my 97 VS Exec.
all the wiring is done, only problems now is no cluster LCD illumination. any ideas?

 

[r2e2]

Hi
I conected my lev 3 cluster to my 93 ute cluster works im very happy thanks for the tips everyone, have pics if anyone needs them

Chears Neil

 

[OzJD]

So is it possible to get LCD illumination and petrol usage etc?
Oh - and my current Level 2 has no petrol light - If I put a L3, will it show?

Thanks,
JD.

 

[seraphic06]

I've installed a L3 into my Esteem and now the car won't start. Any ideas as to what I need to do?

Never mind. I worked it out. I forgot to plug a cable in. Duh.

 

[seraphic06]

I own a station wagon (68 litre tank) so what should I set the cluster to? 60 litres or 80?

 

[OzJD]

I'm pretty sure the wagons have 80 litre tanks... but wait for someone to verify that.


Also - I'm more than half way through installing my L3 cluster

 

[seraphic06]

I'm pretty sure the wagons have 80 litre tanks... but wait for someone to verify that.


Also - I'm more than half way through installing my L3 cluster

68 according to the handbook.

 

[OzJD]

Oh I thought i thought it was only 60, 80, and 90... see why I said verify
I guess you're wondering which one to set it at?

If you go 60, the needle should go above above full
If you go 80, the needle won't ever hit full

Experiment and see how you go - I would personally try 60 first

 

[OzJD]

I've just done this conversion - except for the one wire that goes to the connector near the ECU... because I can't find the connector, Could someone please let me know EXACTLY where it is? Pics would be great as well!

Also, Below is a diagram of the differences (for your convenience) for the cluster connections.

Regards,
OzJD