I have this file, and I've loaded it (as well as trying many others) and when I hit the button to start getting data, the status down the bottom goes "Connecting..." then "Connected" but I don't see any data coming or going. It seems everything is at its set defaults and nothing seems to change.
Is there another step I'm missing?
EDIT: Oh, the cable is a home made one with a Max232 and a few caps. It takes power from the +12v pin on the ALDL plug to run the max232 via a 5v regulator, also hooks up to pin 5 for ground, and then the bus pin.
EDIT2: If I go into Tools -> Preferences -> Data Acq / Emulation, I have the Data Acquisition set to "Use plugin", then "TunerPro Data Acquisition I/O interface". I have this set to COM1 which is the hardware COM port on the back of my laptop. If I hit the "Test for valid interface using settings", it comes back and says all is ok.