Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

turbo 202 oil feed lines

evl83h

New Member
Joined
Dec 16, 2005
Messages
5
Reaction score
0
Points
0
Age
38
Members Ride
vh sl 202
hi there wondering if anyone can help me i have a worked 202 running low comp pistons wana put a turbo on it the only problem im havin is that i have no idea where to run the oil feed line for the turbo from?
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,988
Reaction score
445
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
just tee off the oil pressure switch hole and run braided line to the turbo
 

evl83h

New Member
Joined
Dec 16, 2005
Messages
5
Reaction score
0
Points
0
Age
38
Members Ride
vh sl 202
thanks for that was thinking the same thing but wasent sure coz the hole in the block is realy small
 

hiy_po

New Member
Joined
Jul 31, 2008
Messages
90
Reaction score
0
Points
0
Members Ride
VK Executive
some pics help?

oil1.jpg


oil2.jpg


oil3.jpg


msd1.jpg
 
Last edited:

evl83h

New Member
Joined
Dec 16, 2005
Messages
5
Reaction score
0
Points
0
Age
38
Members Ride
vh sl 202
thanks hiy_po for the photos looks simple wich i like wat hav you used to join the both? did you hav to make it or was it something that just fit?
 

H1GHROLLR

CHEMICALLY SUPERCHARGED
Joined
Feb 18, 2009
Messages
744
Reaction score
2
Points
0
Location
ROCKINGHAM,PERTH
Members Ride
VX CLUBSPORT R8 LS1
what power does that make hiy_po
 

hiy_po

New Member
Joined
Jul 31, 2008
Messages
90
Reaction score
0
Points
0
Members Ride
VK Executive
What does it make

Dynoed it today only got to 151.7rwhp at witch piont it let out a POP thru the
intake at 4600rpm they didnt want to push it any further cause it was leaning out causing the pop. So its back to the drawing board to try and ritchen it up on boost. Dont think its a true indication of its potential. EFI is looking better all the time. :bang:

The adapter came from my local hydraulic hose place. just took the oil sender unit in so they could match the thread. They supplied the hose and extra fittings needed to run it into the turbos oil feed. cost about $40 all up.
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,988
Reaction score
445
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
will be heaps more in it yet 202 with cam and stock EFI outputs about 140 rwhp ide convert to the delco ecu and the factory 202 efi intake setup like sammy has.then fit a 2bar map sensor.gives you full spark control too.
 
Top