Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Ute Tailgate help

Tom_1569

Ecotech Power
Joined
Nov 19, 2006
Messages
2,236
Reaction score
52
Points
48
Location
Gippsland - VIC
Members Ride
'14 SR5 Pusslux
When I boguht the ute, the handle/latch was snapped. I bought Genuine latch/handle from Holden and fitted it no worries. I can no open the tailgate no worries, but when shutting, it wont latch shut. I can manually turn it shut but the rod things wont come out. If i leave the tailgate for 20 minutes one of the latches comes out by itself and latches, other then that I have to manually do it with a screwdriver.
Any ideas? How do these normallly "come out" to latch.
 

keygen

Member
Joined
Nov 9, 2007
Messages
59
Reaction score
11
Points
8
Members Ride
VZ Ute & VZ SV6 Sedan
i had a similar thing on my ute .

had to disconnect the tailgate centre black handle etc & disconnect the rods , bit tricky if i remember correctly .
then remove the screws from the ends & slide it out a bit & clean all the sh*t out of it .

edit: they normally slide out via spring pressure .
 

Tom_1569

Ecotech Power
Joined
Nov 19, 2006
Messages
2,236
Reaction score
52
Points
48
Location
Gippsland - VIC
Members Ride
'14 SR5 Pusslux
i had a similar thing on my ute .

had to disconnect the tailgate centre black handle etc & disconnect the rods , bit tricky if i remember correctly .
then remove the screws from the ends & slide it out a bit & clean all the sh*t out of it .

edit: they normally slide out via spring pressure .

Cheers, yeah I had to disconnect the rods anyway to fit new latch, but ill pull the whole thing apart, and try and grease it and see if that helps.

Oh spring? Wheres the spring?
 

keygen

Member
Joined
Nov 9, 2007
Messages
59
Reaction score
11
Points
8
Members Ride
VZ Ute & VZ SV6 Sedan
where the striker comes out of the tailgate side ends , behind the 2 screws .

i tried to pull this bit out b4 disconnecting the centre rods :)

stretchage :)

edit: i only replaced the lever initially . 1 screw .
 

Tom_1569

Ecotech Power
Joined
Nov 19, 2006
Messages
2,236
Reaction score
52
Points
48
Location
Gippsland - VIC
Members Ride
'14 SR5 Pusslux
where the striker comes out of the tailgate side ends , behind the 2 screws .

i tried to pull this bit out b4 disconnecting the centre rods :)

stretchage :)

edit: i only replaced the lever initially . 1 screw .

Ok, Im trying to get them out as we speak, but **** me they are tight and I dont have a big enough screw driver, sent someone to the workshop to grab one, just waiting :) Hopefully I find these springs, will clean it all up and grease, HOPEFULLY thats the fix.
looking in the Holden Manual for the VU (which looks the same assembly) theres no springs.
 

keygen

Member
Joined
Nov 9, 2007
Messages
59
Reaction score
11
Points
8
Members Ride
VZ Ute & VZ SV6 Sedan
remove/disconnect the rods etc for the centre lever assembly first , otherwise the end bits will not come out far enough to clean !

u need a larger star screwdriver ? for the end bits ?
 

Tom_1569

Ecotech Power
Joined
Nov 19, 2006
Messages
2,236
Reaction score
52
Points
48
Location
Gippsland - VIC
Members Ride
'14 SR5 Pusslux
remove/disconnect the rods etc for the centre lever assembly first , otherwise the end bits will not come out far enough to clean !

u need a larger star screwdriver ? for the end bits ?

Currently sitting disconnected, I think they have got lost, there taking there sweet time lol.

Yeah the end bits, assuming they need to come out to remove the rods?
 

keygen

Member
Joined
Nov 9, 2007
Messages
59
Reaction score
11
Points
8
Members Ride
VZ Ute & VZ SV6 Sedan
the end bits stay connected to the rods if memory serves well .

they slide out after the centre bit is undone .

anywho , i'm going to drink some more rum , as u're friend/s may be doing :) .
best of luck .
 

Tom_1569

Ecotech Power
Joined
Nov 19, 2006
Messages
2,236
Reaction score
52
Points
48
Location
Gippsland - VIC
Members Ride
'14 SR5 Pusslux
the end bits stay connected to the rods if memory serves well .

they slide out after the centre bit is undone .

anywho , i'm going to drink some more rum , as u're friend/s may be doing :) .
best of luck .

Ahh, got it.... Yep no need to remove the side bits as you said, aslong as they are disconnected they come out. Mine took some force though they were that jammed up with crap lol. All out, cleaned nicely and regreased, works awesome :) thanks for your help.

No idea why the VU manual says to remove the tailgate limit cable bracket first.
 

AdamVs

New Member
Joined
Aug 17, 2009
Messages
3
Reaction score
0
Points
0
Members Ride
97 Vs Commodore Ute
Hey fellas just a quick question... Is there an easy way to reassable the locking mechanism for my tail gate? I just tried to nut mine out and got no where. I think the key may be the little gold clips that attach to the rods at the center lever assembly??
 
Top