Blackcalais350
New Member
- Joined
- Dec 9, 2017
- Messages
- 1
- Reaction score
- 0
- Points
- 1
- Age
- 30
- Location
- Port lincoln South Australia
- Members Ride
- VE calais 6ltr, VX Calais 5.7Ltr, Vr calais 5.0L
So I'm currently building a V6 ecotec converted 85 extra cab hilux for a skid car, fitting the engine is no problem wiring is another issue.
I plan on using the original loom and ecu from the VS with no BCM and running no VATs, my issue is what wires do I need to connect up to my ignition etc from the two plugs that would connect to the dash loom in the vs? This is the only issue I have and I can find a pinout or a simple answer on any thread
I plan on using the original loom and ecu from the VS with no BCM and running no VATs, my issue is what wires do I need to connect up to my ignition etc from the two plugs that would connect to the dash loom in the vs? This is the only issue I have and I can find a pinout or a simple answer on any thread