RGVMelb
New Member
I've just done an engine swap in my VY. Used a VS motor, swapped manifolds, looms and everything to suit the VY. It's a manual, used the flywheel/clutch etc from the VY motor on the VS.
Problem is now it's running quite rough. Feels like the motor is out of balance. The clutch kit only has 50k on it and it was fine prior to the engine swap. Engine mounts aren't that flash, but with only 50k on them and no time to spare they didn't get replaced. Any thoughts on what it could be or where to start?
Problem is now it's running quite rough. Feels like the motor is out of balance. The clutch kit only has 50k on it and it was fine prior to the engine swap. Engine mounts aren't that flash, but with only 50k on them and no time to spare they didn't get replaced. Any thoughts on what it could be or where to start?