Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

V6 speedway camshaft

Discussion in 'Mace Engineering' started by T79, Dec 9, 2016.

  1. T79

    T79 New Member

    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Joined:
    Dec 8, 2016
    Location:
    Wa
    Members Ride:
    Vy
    hi just after your opinion I am looking at building an engine for speedway it is a street stock so it can be a Buick or Ecotec engine, the restrictions are must run a vn vp ecu allowed up to 60thou oversize pistons and allowed to deck block and machine cylinder head up to 60 thou standard manifolds am looking for a low to mid range torquey cam
     
  2. MACE

    MACE Well-Known Member

    Messages:
    3,140
    Likes Received:
    60
    Trophy Points:
    48
    Joined:
    Mar 30, 2008
    Hi T79,

    My sincere apologies for the delay in getting back to you.

    We have had extensive experience with supplying camshafts to suit speedway applications in classes such as yours with great success. To give you an idea in regards to cams that we would have to suit, please refer to the link below.

    https://www.maceengineering.com.au/epages/shop.sf/en_AU/?ObjectID=1469568

    If you have any more questions please don't hesitate to ask.

    Kindest Regards,
    Steve
     

Share This Page