V6 vy

[NVN07]

Nevin's Hothouse VY Spac

Hi,

This is my 2003 VY S pack commie. I bought it completely stock November last year. Since then I have put a set of 20" Status Judge wheels raped in Nankang 245/30/R20 tyres. I have also swaped out the stock head unit for a JVC double din DVD head unit, also have a JVC 600w amp and 2 x 12" Pioneer 800w subs. Removed the V6 badges from under the indercators and the holden badge from the boot. I put some fog lights in and put a mesh in under where the number plate is.

Future Mods are a dual 2 1/2" exhaust and new extractors, K&N panel fillter, 70mm trottle body, Painting the dash hothouse green, and new taillights.

Hope you like my car, if you have any advice or ideas im all ears as I am pretty new to car modification.

 

[DUK13Y]

Looks good mate. Dual 2.5" is way overkill. Go a single 2.5 or twin 2.25 at most.

 

[NVN07]

Is that cause it a V6? what about a single 3? i was thinking to go dual so it can stay seperate till pretty close to the end.

 

[daniel555]

Looks good, I would say lower it, But it'd be quite hard and expensive with 20's.

 

[nicko]

single 3" is still overkill, unless you plan on getting a bigger cam or supercharging it. Stick with a 2.5" single system or you will loose power.

 

[NVN07]

Thanks for the heads up. I would love to lower it bout 30mm but i need to get my guards rolled and most probably pumped a little too because it alredy rubs on the tyre when going over bumps. Was thinking bout losing the spoiler to? might make it seem lower?

 

[PaulSV6]

Having a dual 2.5" or single 3" you'll lose a lot of back pressure. hence u will have alot of droning.

Awesome car mate:thumbsup:

 

[NVN07]

Took the Spoiler off on the weekend.

 

[jesse3.8]

Car looks sweet as and thoses rims are fugn nice

I'd say youd want to go 50mm lower at least

 

[NVN07]

After admiring zeussy's and Fat.36L's rides i decided to do a little photo shop.
VZ Flute, Lowered, Shaved door handles, side mirror green, slight tint.