rtmpgt
Active Member
- Joined
- Dec 13, 2016
- Messages
- 196
- Reaction score
- 96
- Points
- 28
- Age
- 33
- Location
- Perth, WA
- Website
- www.pgt.design
- Members Ride
- 2010 VE1.5 SV6 Ute
Hi everyone! I've got a 2010 VE Ute with the SIDI (LLT) engine. I was wondering where the best point to grab a vacuum feed is.
I need it to be able to actuate my Bimodals. I also need a second feed to perhaps plumb a catch can in using a separate loop.
Also, does anyone know What size line will I need to use as well? I plan on plumbing it into a vacuum distribution block to control the Bimodals and also give a reading to a Vacuum gauge.
Any help would be great!
I need it to be able to actuate my Bimodals. I also need a second feed to perhaps plumb a catch can in using a separate loop.
Also, does anyone know What size line will I need to use as well? I plan on plumbing it into a vacuum distribution block to control the Bimodals and also give a reading to a Vacuum gauge.
Any help would be great!