YRUHATIN
New Member
- Joined
- Jan 14, 2021
- Messages
- 13
- Reaction score
- 14
- Points
- 3
- Age
- 27
- Location
- Renmark, SA 5341
- Members Ride
- HSV VZ Clubsport - VB SLE 5L - VH SL V8 - VS Stato
Hi all,
Here are my project cars, details listed below.
VBSLE:
This was my first v8, which is a factory SLE, 253 Trimatic, which I drove daily for a good year or 2 until I decided to spend some coin on it. It is currently running a 304 T700 and VL Turbo diff. Recently done heads, 284 Crane Cam, double row timing chains, lifters, springs, etc. Has a very mean lump to it and goes very good for a 304. Is also slammed on bumpy choppies because I like to tuck tyre.
TUFFVH:
I picked up the VH about 2 years ago for $700 with no motor or trans. Tags were still there and is a factory 253 Trimatic. It has been completed rubbed back and I am slowly shaving the engine bay along with doing rust and dent repairs. Plans for this is full VF interior and most likely LS1 T56 combination.
You can find the TUFFVH build on instagram also!
Here are my project cars, details listed below.
VBSLE:
This was my first v8, which is a factory SLE, 253 Trimatic, which I drove daily for a good year or 2 until I decided to spend some coin on it. It is currently running a 304 T700 and VL Turbo diff. Recently done heads, 284 Crane Cam, double row timing chains, lifters, springs, etc. Has a very mean lump to it and goes very good for a 304. Is also slammed on bumpy choppies because I like to tuck tyre.
TUFFVH:
I picked up the VH about 2 years ago for $700 with no motor or trans. Tags were still there and is a factory 253 Trimatic. It has been completed rubbed back and I am slowly shaving the engine bay along with doing rust and dent repairs. Plans for this is full VF interior and most likely LS1 T56 combination.
You can find the TUFFVH build on instagram also!
Please.