Hi guys, Have just ordered my self 2 brembo callipers from local Holden dealer, Part numbers, Gm-92221882 Gm-92221883 According to the guy who I delt with there this is everything I need as far as the calliper is concerned. However when I google those part numbers I have ordered, everyone else who has bought them says I need a spring kit, Part number 89047711 When I look on the computer at the Holden dealer the picture of what I have ordered shows everything including that spring kit except for longer bolts. Can anyone help?? Cheers
This doesn't really make much sense to me with out a map and some pictures. You will nead rotors and pads Im guessing. Also, theses brebros are 2010 model fyi. What has holden charged you?
$700 Getting pads and rotors from gsl rally sport Is there a newer part number I should go back with?? Car is early 2011 ss that I wanted the redline package for
You need: calipers (obviously) pin set washers bolts (are an off the shelf holden item) Im pretty sure in all the sets Ive sold, the spring set comes with the calipers
The calipers have just got here. The thing I notice is that there is not fitting to brake hose. Only the thread into the caliper itself. Will I need a brembo to standard ss brake line adaptor?? Where do I get from?? Cheers
hey mate, how much did that cost you??? did you just buy the parts and do it urself or drop it in at holden and get it done?? I've got An SSV Z Sedan with Red brembos on the front and id love to have em on the rear too but I'm not sure about how much i would actually have to change and what it would cost......
Bonners doesnt supply red brembros for the rear. Could be wrong, ive been wrong before. Can paint silver ones red I guess. My red rear brembros were $3600 plus fitting. I dont do any thing to my car, its all by my tunner. BTW. I bought my brembros from the only brembro supplyer in NSW/Australia, others are selling excess holden stock.
I supply silver or yellow. Red was a holden thing it appears. Please send me a pm for pricing. I can also supply 6 piston front calipers in kit.
All up this cost me about $1250 2 calipers 2 dba series 4000 rotors 1 set remsa pads 1 litre trw 600 degree brake fluid I did the install myself I did ask around a few workshops what they would charge. Between 100-150 was about right. Holden dealer wanted just under $300 Cheers
The part number 89047711 is for a single caliper, so you will need this part number x2 There is also another part number for that item which is 89047742, but I think that is an old part number for the same thing.
