Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VE Commodore 'Flat' Stance

Skrrt

Member
Joined
Feb 12, 2018
Messages
58
Reaction score
6
Points
8
Age
24
Location
Australia
Members Ride
VE Z Series sv6
Yo,

Gunna lower my VE sv6 so I can be racecar

But I also would like to have a flat stance. I want to get rid of the rake, I dont like it.

I would just measure it myself in around 6 hours but I can't now because it is not right outside oops pleas help

King springs standard up front since I can scrape the wheel stops at the shopping centre and have already busted it a little bit

King springs Super Low/Ultra Low on the rear?

That... is the question.


(Monroe GT sports shocks will be accompanying these springs)
 

gossie

Well-Known Member
Joined
Jun 7, 2011
Messages
2,570
Reaction score
954
Points
113
Location
Gold Coast.
Members Ride
VE International 3.6L
Where do you intend to race it?
 

ChRiDDa

Active Member
Joined
Jan 25, 2004
Messages
751
Reaction score
147
Points
43
Location
N/A
Members Ride
VE SS-Z Sportwagon
*yawn*

school holidays again is it?
 

vc commodore

Well-Known Member
Joined
Jun 18, 2014
Messages
10,701
Reaction score
12,573
Points
113
Location
Like the Leyland Brothers
Members Ride
VC, VH and VY
Firstly, to turn it into a race car, you will need to rebuild the motor Hopefully you have a 6 speed manual transmission, because autos aren't really good for circuit work....You have to add a roll cage, some sticky tyres (slicks for the dry, wets for the wet weather)...You need adjustable shocks, locked diff and remove a sheet load of stuff inside the car to lighten it.....If you are a serious racer, get carbon fibre panels for it too....

Once you have accomplished all this stuff, drive it where you want and you'll be bound to be minus this race car ever being allowed on the street again...
 

Skrrt

Member
Joined
Feb 12, 2018
Messages
58
Reaction score
6
Points
8
Age
24
Location
Australia
Members Ride
VE Z Series sv6
*yawn*

school holidays again is it?

I have my full license bro wyd now xd?

I shall now point out plainly and obviously what my question was.

"Do I put lows on the front and super lows on the rear to get a 'flat' stance?"

Next, I would like to ask, "Once I do this, will my handling suffer?"
 

VTS5

TechJunkie
Joined
Jul 26, 2005
Messages
1,373
Reaction score
300
Points
83
Location
Sth.East\Melb
Members Ride
VE OMEGA 3.6L Dual Fuel
And don't forget the bow tie badges (for extra grunt) , one for the bonnet one for the boot :cool:
 

Tonner Matt

Well-Known Member
Joined
May 12, 2014
Messages
1,791
Reaction score
2,191
Points
113
Location
Darwin
Members Ride
VZ 1 Tonner LS1 M6
And don't forget the bow tie badges (for extra grunt) , one for the bonnet one for the boot :cool:

Pissing myself laughing.gif
 

Skrrt

Member
Joined
Feb 12, 2018
Messages
58
Reaction score
6
Points
8
Age
24
Location
Australia
Members Ride
VE Z Series sv6
And don't forget the bow tie badges (for extra grunt) , one for the bonnet one for the boot :cool:
Its pretty much a v8 swap for me and its even more aerodynamic than the holden badge :D
 

gossie

Well-Known Member
Joined
Jun 7, 2011
Messages
2,570
Reaction score
954
Points
113
Location
Gold Coast.
Members Ride
VE International 3.6L
May I ask what club do you belong to?
 
Top