Ve ssv oil pressure/amp centre display losing oil pressure when warm

[Slimbrady1313]

Default Ve ssv oil pressure/amp centre display losing oil pressure when warm
Hey guys i have a 2008 ve ssv and the centre oil pressure display reads about 3-4 bars when first started then reads no bars when warm. There are no noises coming from the engine and no oil light comes on??? What could it be

 

[Capsule]

Could be a faulty sensor but that would also throw a low oil pressure code I guess.
You should try and connect an OBD reader to compare your oil pressure display value with a direct reading from the ECU. This would help determine if only the display is defective.

 

[Andrewvessv]

What was the issue? Mine reads about 4 or 5 bar when cold, but as the engine warms up goes all way to 1 when at a traffic light. Taking it to get looked at next week. I've seen it go all way to 0 bars before but no noise or engine lights come on

 

[VS_Pete]

OP`s first and last post.
Good luck.