Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

VE stability control fault

Kaleb6

New Member
Joined
Aug 14, 2018
Messages
2
Reaction score
4
Points
1
Age
26
Location
Geelong
Members Ride
VE sports wagon 2010 v6
I have an issue with my 2010 VE sports wagon. When driving the car will enter ‘safety mode’ the dash says ‘ stability control fault’ and when stopped the car shakes fairly roughly. This problem has been getting worse lately and seems to happen most when wet. Any ideas on what this could be and how much work will be needed to fix?
 

Attachments

  • 14C078BA-ED54-4C82-A062-B5D58FD908E6.jpeg
    14C078BA-ED54-4C82-A062-B5D58FD908E6.jpeg
    86.2 KB · Views: 284
  • 3551EEA6-38C1-40B7-AB55-73A8EF551F7A.jpeg
    3551EEA6-38C1-40B7-AB55-73A8EF551F7A.jpeg
    93.9 KB · Views: 226
  • D25E97D6-10B6-4B9B-A405-37EC0199C943.jpeg
    D25E97D6-10B6-4B9B-A405-37EC0199C943.jpeg
    87.9 KB · Views: 393

MYVESSV8

Well-Known Member
Joined
Nov 28, 2009
Messages
3,074
Reaction score
330
Points
83
Location
Brisbane/GoldCoast
Members Ride
VE 6LT M6
Battery check, wheel sensor, rear loom, maf clean, some of the common causes
 

jone5y

New Member
Joined
Apr 3, 2010
Messages
6
Reaction score
0
Points
1
Members Ride
VUII S ute
A mate had this with his. It would stick itself in the one gear until the fault got cleared. Clearing it required turning it off and on again. Clearly that's not the solution for you though.
 

Ve6l

New Member
Joined
Sep 23, 2018
Messages
7
Reaction score
0
Points
1
Age
44
Location
Perth
Members Ride
2011 VE SS-V
Have had a similar thing recently, rough running, check engine light, stability randomly firing. Read the codes for cyl1/2 misfire, did plugs, leads, swapped a coil pack to confirm not that then had two injectors replaced, engine running well now. Mine is l77 ve ss 2011. Separately getting the stuck in 4th gear and p0700 Powertrain codes, shudder at highway speeds, turns out coolant leaked into the trans and trans is stuffed. I’d recommend get the codes read, could try a cheap obd2 reader
 

Kaleb6

New Member
Joined
Aug 14, 2018
Messages
2
Reaction score
4
Points
1
Age
26
Location
Geelong
Members Ride
VE sports wagon 2010 v6
Took it into my mechanic. Had throttle body faults, replaced throttle body which has fixed it completely. Haven’t had an issue since. Fair whack to the wallet to replace it but well worth it.
 

VS_Pete

Donating Member
Joined
Dec 23, 2007
Messages
5,062
Reaction score
29,383
Points
113
Location
Brisbane
Members Ride
VE II SV6 MY12 SPORTWAGON
Took it into my mechanic. Had throttle body faults, replaced throttle body which has fixed it completely. Haven’t had an issue since. Fair whack to the wallet to replace it but well worth it.
Thanks for letting us know mate.
Some people just never let us know
 

Letswagon

New Member
Joined
Aug 10, 2018
Messages
13
Reaction score
4
Points
3
Age
30
Location
South Australia
Members Ride
VE SII Sportswagon
Thanks for letting us know mate.
Some people just never let us know
been seeing a number of old posts getting attention asking if they ever fixed it, Nice to see the OP coming back and updating us.
 

Sharon need help

New Member
Joined
Oct 3, 2018
Messages
8
Reaction score
0
Points
1
Age
46
Location
Melbourne
Members Ride
VU11 HOLDEN COMMODORE 5.7litre LS1 GEN111 UTE
I have an issue with my 2010 VE sports wagon. When driving the car will enter ‘safety mode’ the dash says ‘ stability control fault’ and when stopped the car shakes fairly roughly. This problem has been getting worse lately and seems to happen most when wet. Any ideas on what this could be and how much work will be needed to fix?
Mine did the same up until recently I got an auto elec to replace the sensor and haven't had a problem since
 

Tonner Matt

Well-Known Member
Joined
May 12, 2014
Messages
1,791
Reaction score
2,190
Points
113
Location
Darwin
Members Ride
VZ 1 Tonner LS1 M6
I got an auto elec to replace the sensor and haven't had a problem since

What sensor did you have replaced ?
If you let people know which one, this info could be useful to someone else researching this problem in the future
 
Top