ve transmission shift problem

[Utel67]

Did you remove the pan on the the transmission, was the fluid burnt ? or was there like a fine sand grit material or metal stuck to the magnet ?.

 

[clutch1967]

ok thanks
and yes read and watched shylarkings link

 

[clutch1967]

Did you remove the pan on the the transmission, was the fluid burnt ? or was there like a fine sand grit material or metal stuck to the magnet ?.

there was a little grit in the pan nothing to bad tho fluid was a little burnt but seen worse

 

[clutch1967]

Have a read and watch the video in the link.

https://www.google.com/amp/s/www.70...0e-shift-solenoid-symptoms-and-diagnosis/amp/

I will watch that link now thanks

 

[clutch1967]

Tech2 which you’d only get on eBay for us amateurs.

You would also be best armed with the factory manual.

don't have a tech2 but I do have a audtel scanner it reads most of the codes

 

[Fu Manchu]

The Tech2 will be able to isolate components and test their functionality.

Code readers can’t do that.

You can find one for around $400. When looking at lost time or even the cost of a couple of trips to a well equipped mechanic, they can pay for them selves quite fast.

 

[clutch1967]

Have a read and watch the video in the link.

https://www.google.com/amp/s/www.70...0e-shift-solenoid-symptoms-and-diagnosis/amp/

ok I will hav a look at that now thanks

 

[clutch1967]

The Tech2 will be able to isolate components and test their functionality.

Code readers can’t do that.

You can find one for around $400. When looking at lost time or even the cost of a couple of trips to a well equipped mechanic, they can pay for them selves quite fast.

yes I have been thinking about buying 1 I think I might do that and give it a try
it will be usfull for other stuff anyway

 

[Utel67]

Replace the shift solenoids, worst case scenario you have two spare shift solenoids.